Automatic security barrier

Automatic security barrier Model No. EN-208D Convenient operation and safe

Technical Data

Arm Stroking Time:1-8S(depend on the configuration );

Interface: Infra interface,interface of air bag,interface for connecting the button, 485 interface;

Power:AC220V/50Hz,≤200W(depend on the configuration);

Weight:5KG-80KG(depend on the configuration);

Size of product:00*380*1008.

Installation Instruction:

Fixed the barrier body:fixed 4pcs of M12 expansion bolts to the expected place, fixed the briquette to lock the bolts tightly.Circuit Diagram:Line Connection:(1)Install the manual switch to the suitable place(also can without using this),connect the controller according to the double-mechanism shield line.(2)Connect the power line into the barrier controller(please pay attention to the good connection of ground and use the leakage protection switch) (3)Passed the spindle hole to connect the antenna of  railing and power line of light with the related plug-in unit of barrier body (please check the diagram of control board for reference).Fixed the railing:fixed the barrier railing to the elusive of machine body (please pay attention to not damage the connect line).Installation instruction of sensor line:sing the cutting machine to make a rectangular groove at the horizontal: 2-6 m, vertical: 1m, the depth of the groove at 15-50 mm, the width at 1.2-5 mm ( the width of cutting wheel),using  more than 0.75 m2 single-strand copper wire to around in the wire groove (if the horizontal width 3 m: around 3 times, 3 m or more than 3 m: around 2 times), make the coil out and connect with the controller. Sealed the groove with the cement. Please pay attention not damage the coil.Check the wire connection and motor carefully (the wiring should apply for the safety standard), and then get through the line to test.Through plug and pull out the “sensor sensitivity” jumper line (see the diagram of controller board) to change the feature of sense.Pressing the upper and down key can change the barrier between the mode of anti-smashing sensor and automatic closing mode.

Automatic security barrier